In hypoid bevel gears, the drive pinion is axially offset on the top or on the bottom. The pinion diameter is larger to enable higher transmissions. Hypoid bevel gears have smoother tooth engagement and a longer lifetime. They are used at high speeds, with heavy or small loads, for quiet operation or for drives whose input and output shafts are axially offset.
- For transmitting forces at at angle
- Typically used in high torque applications
- Applications with heavy or light loads
- Low noise operation
- Low vibration transmission
- For drives that have input and output axially offset
- For unusually high gear reduction
- Applications with large pinion requirements
- For all appications with space and weight limits
Gearbox Sizes and Specifications
We offer the following ready-to-install and case-hardened bevel gear pairs from our DynaGear range. Click on the corresponding ID number to download a PDF datasheet for each bevel gear set.
We also offer customized bevel gear sets. Contact us and let us know what you need. MS-Graessner specializes in customized gearing solutions.
CAD files- Downloadable 2D and 3D CAD files. Multiple formats available.Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22055H10701 | 35 | 53 | 6000 | 9 |
4:1 | 22055H10901 | 35 | 53 | 6000 | 9 |
5:1 | 22055H11101 | 35 | 53 | 6000 | 9 |
6:1 | 22055H12001 | 35 | 53 | 6000 | 9 |
8:1 | 22055H12401 | 35 | 53 | 6000 | 9 |
10:1 | 22055H12801 | 35 | 53 | 6000 | 9 |
12:1 | 22055H14001 | 25 | 38 | 6000 | 9 |
15:1 | 22055H14301 | 25 | 38 | 6000 | 9 |
Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22075H10701 | 70 | 105 | 6000 | 14 |
4:1 | 22075H10901 | 70 | 105 | 6000 | 14 |
5:1 | 22075H11101 | 70 | 105 | 6000 | 14 |
6:1 | 22075H12001 | 70 | 105 | 6000 | 14 |
8:1 | 22075H12401 | 70 | 105 | 6000 | 14 |
10:1 | 22075H12801 | 70 | 105 | 6000 | 14 |
12:1 | 22075H14001 | 50 | 75 | 6000 | 14 |
15:1 | 22075H14301 | 50 | 75 | 6000 | 14 |
Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22090H10701 | 140 | 210 | 5000 | 18 |
4:1 | 22090H10901 | 140 | 210 | 5000 | 18 |
5:1 | 22055H11101 | 140 | 210 | 5000 | 18 |
6:1 | 22090H12001 | 140 | 210 | 5000 | 18 |
8:1 | 22090H12401 | 140 | 210 | 5000 | 18 |
10:1 | 22090H12801 | 140 | 210 | 5000 | 18 |
12:1 | 22090H14001 | 95 | 143 | 5000 | 18 |
15:1 | 22090H14301 | 85 | 143 | 5000 | 18 |
Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22115H10701 | 260 | 390 | 4000 | 23 |
4:1 | 22115H10901 | 260 | 390 | 4000 | 23 |
5:1 | 22115H11101 | 260 | 390 | 4000 | 23 |
6:1 | 22115H12001 | 260 | 390 | 4000 | 23 |
8:1 | 22115H12401 | 260 | 390 | 4000 | 23 |
10:1 | 22115H12801 | 260 | 390 | 4000 | 23 |
12:1 | 22115H14001 | 180 | 270 | 4000 | 23 |
15:1 | 22115H14301 | 180 | 270 | 4000 | 23 |
Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22130H10701 | 430 | 645 | 3000 | 27 |
4:1 | 22130H10901 | 430 | 645 | 3000 | 27 |
5:1 | 22130H11101 | 430 | 645 | 3000 | 27 |
6:1 | 22130H12001 | 430 | 645 | 3000 | 27 |
8:1 | 22130H12401 | 430 | 645 | 3000 | 27 |
10:1 | 22130H12801 | 430 | 645 | 3000 | 27 |
12:1 | 22130H14001 | 300 | 450 | 3000 | 27 |
15:1 | 22130H14301 | 300 | 450 | 3000 | 27 |
Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22140H20701 | 720 | 1080 | 3000 | 32 |
4:1 | 22140H20901 | 720 | 1080 | 3000 | 32 |
5:1 | 22140H21101 | 720 | 1080 | 3000 | 32 |
6:1 | 22140H22001 | 720 | 1080 | 3000 | 32 |
8:1 | 22140H22401 | 720 | 1080 | 3000 | 32 |
10:1 | 22140H22801 | 720 | 1080 | 3000 | 32 |
12:1 | 22140H24001 | 510 | 765 | 3000 | 32 |
15:1 | 22140H24301 | 510 | 765 | 3000 | 32 |
Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22160H20701 | 1100 | 1650 | 2500 | 38 |
4:1 | 22160H20901 | 1100 | 1650 | 2500 | 38 |
5:1 | 22160H21101 | 1100 | 1650 | 2500 | 38 |
6:1 | 22160H22001 | 1100 | 1650 | 2500 | 38 |
8:1 | 22160H22401 | 1100 | 1650 | 2500 | 38 |
10:1 | 22160H22801 | 1100 | 1650 | 2500 | 38 |
12:1 | 22160H24001 | 815 | 1223 | 2500 | 38 |
15:1 | 22160H24301 | 815 | 1223 | 2500 | 38 |
Ratio | ID no. | Nominal Torque (Nm) | Max Torque (Nm) | Max Speed (RPM) | Axial Offset (mm) |
---|---|---|---|---|---|
3:1 | 22190H20701 | 1440 | 2160 | 2500 | 42 |
4:1 | 22190H20901 | 1440 | 2160 | 2500 | 42 |
5:1 | 22190H21101 | 1440 | 2160 | 2500 | 42 |
6:1 | 22190H22001 | 1440 | 2160 | 2500 | 42 |
8:1 | 22190H22401 | 1440 | 2160 | 2500 | 42 |
10:1 | 22190H22801 | 1440 | 2160 | 2500 | 42 |
12:1 | 22190H24001 | 1020 | 1530 | 2500 | 42 |
15:1 | 22190H24301 | 1020 | 1530 | 2500 | 42 |